It is a heat exchanger designed & manufactured to reduce / cool the
compressed air temperature to desired level, so the condensation takes
place & vaporized moisture & oil in air gets converted in liquid
droplets which further separated by moisture separator. The after
cooler substantially reduces the moisture & oil load coming on down
stream at the initial stage. The cooling media can be water or air.
Shell and tube (Vertical / Horizontal) with and without moisture separator.
At the outlet of Compressor.
Upto 5000 CFM at 10 Kg/cm2 operating pressure.
Shell – As per IS 1239 / IS 2062.
Tube – As per BS 2871 part III C – 105,